China Leading Manufacturer for Plastic Gate Valve - Knife Gate Valve – Hongbang Manufacture and Factory

Leading Manufacturer for Plastic Gate Valve - Knife Gate Valve – Hongbang

Short Description:

Product Detail

Product Tags

Feedback (2)

The consumer fulfillment is our primary goal. We uphold a consistent level of professionalism, top quality, credibility and service for Rubber Flapper Check Valve, S/S Check Valve, Forged Valve, We take quality as the foundation of our success. Thus, we focus on the manufacture of the best quality products. A strict quality management system has been created to ensure the quality of the products.

Leading Manufacturer for Plastic Gate Valve - Knife Gate Valve – Hongbang Detail:

OK-202-HANDWHEEL

NO.	PART	Choose		QTY
1	BODY	GGG40		1
2	SEAT	EPDM/NBR		1
3	GATE	SS304/SS316		1
4	RETAINER	SS304/SS316		2
5	O-RING	NBR		5
6	GLAND	GGG40		3
7	STEM	SS304/SS316		1
8	LOCK NUT	BRASS
TEST PRESSURE			SHELL	SEAL
		HYDROSTATIC	1.5 MPa	1.1 MPa
STANDARD	DESIGN CODE		EN 593
	INSPECTION & TEST		EN 12266
	END STANDARD		PN10
	FACE TO FACE		EN 558

GENERAL CHARACTERISTICS

Range : from DN 50 to DN 600.
Function ON/OFF or regulation.
Wafer threaded mounting ISO PN10.
Unidirectional tightness, direction indication thanks to the arrow on the body.
Small retention zone: the gate is guided in the body and has little clearance.
Gland assembly: packing and O-ring (same materials as seat joint) to assure the elasticity and decrease the operating torque. Small head loss. Possibilityto regulate thick fluids with the adaptation of a diaphragm ring.

STANDARDS

Manufacture according to the requirements of the European directive
2014/68/UE «Equipments under pressure» : modulate H.
On request : Product in accordance to european directive
“Potentialy explosive atmospheres” N° 94/9/EC : ATEX II 2 GD c and ATEX II 3 GD c.
Test procedures are established according to standards EN 12266-1, DIN 3230, BS 5154 and ISO 5208.

Size	HA	HB	HC	HC	φ C
2″/DN50	65	289	153	43	PN10
2-1/2″/DN65	70	313	172	46	PN10
3″/DN80	95	335	182	46	PN10
4″/DN100	108	380	215	52	PN10
5″/DN125	124	415	235	56	PN10
6″/DN150	135	470	260	56	PN10
8″/DN200	165	580	325	60	PN10

We can meet the various needs of customers at home and abroad. We welcome new and old customers to come to consult & negotiate with us. Your satisfaction is our motivation! Let us work together to write a brilliant new chapter!

We are now looking forward to even greater cooperation with overseas customers based on mutual benefits. We will work wholeheartedly to improve our products and services. We also promise to work jointly with business partners to elevate our cooperation to a higher level and share success together. Warmly welcome you to visit our factory sincerely.

Product detail pictures:

Related Product Guide:

We have been proud from the higher consumer gratification and wide acceptance due to our persistent pursuit of high quality both on product or service and service for Leading Manufacturer for Plastic Gate Valve - Knife Gate Valve – Hongbang , The product will supply to all over the world, such as: Canada, Bogota, Mauritania, The best and original quality for spare parts is a most important factor for transportation. We may stick on supplying original and good quality parts even a little profit earned. God will bless us to do kindness business forever.

150lb Valve